热轧钢板Hot Rolled Steel Plate
冷轧卷板Prime Cold Rolled Steel Sheet in Coil
热轧卷板Prime Hot Rolled Steel Coil
板材Plate products
型钢Profile products
特钢Special steel products
钢带Steel strip product
建材Building materials product
主要产品The main products
邮箱：
电话：
一般结构用钢板
Steel Plates for General Structure主要用途
Steel plates for general structure are widely used in engineering structures such as steel structure buildings, construction machinery, heavy duty cars, bridges, wind power， pressure vessels and so on.
牌号和标准
产品规格
锅炉和压力容器用钢板
Steel Plates for Boilers and Pressure Vessels主要用途
They are mainly used to manufacture boilers and pressure vessels. The steel plates for pressure vessels can be fabricated into device that will sustain certain pressure, temperature and medium, so they are required to possess high strength, good toughness, weldability and surface quality. Many kinds and sizes of the products are required to deliver in heat treatment condition and satisfy ultrasonic test requirements. These steels are widely used in various sectors in national economy, such as reactor, heat exchanger, separator, spherical tank, oil tank, LPG tank ,boiler steam drum and pressure pipes in machinery, petroleum and chemicals, electric power and metallurgy industries, etc.
牌号和标准
|
英文名称 |
型号 Grade |
规范标准号 |
|
加热炉和压干净的器皿用不锈钢板 |
Q245R、Q 345R、Q370R、Q420R |
GB/T 713 |
|
18MnMoNbR、13MnNiMoR、15CrMoR、12Cr2Mo1R、14Cr1MoR、12Cr1MoVR |
||
|
低溫重压场所用钢材 |
16MnDR、15MnNiDR、15MnNiNbDR、09MnNiDR |
GB/T 3531 |
|
08Ni3DR、06Ni9DR |
||
|
锻造度罐体及电力负压保温钢管用钢材 |
A537/SA537 CL2/CL3 |
美标 |
|
07MnMoVR、07MnNiVDR、07MnNiMoDR、12MnNiVR |
GB/T 19189 |
|
|
抗HIC/SSCC罐体不锈钢 |
Q245R(R-HIC)、Q345R(R-HIC)、(S)A516Gr60/65/70(R-HIC) |
业主要 |
|
焦炉炉壳板 |
LK490C |
|
|
另一个其他国家标准规范 |
A515/SA515、A516/SA516、A537/SA537同时A517/SA517全系列等 |
美标 |
|
P355GH、16Mo3、13CrMo4-5 |
德国标准 |
|
|
SPV355、SPV490 等 |
日标 |
产品规格
主要产品The main products邮箱：电话：
主要产品The main products邮箱：电话：
高强度结构用钢板
High strength steel plates for structure主要用途
High strength steel plates for structure have high strength, good low temperature toughness in addition to the excellent welding performance. They are mainly used for the fabrication of the high strength welding structure of construction machinery, coal mining equipment（hydraulic support, scraper conveyer）,boom, outrigger, frame , bulldozer, dump truck, drilling platform ,drilling rig and steel structure and so on. According to purpose，there are 60-80kg high strength steel plates，60-90kg low welding crack sensitive steel plates, quench and temper ultra-high strength steel plates etc.
牌号和标准
产品规格
高强度结构用钢板
High strength steel plates for structure主要用途
牌号和标准
60-80kg级堆物攻度节构不锈板材（60-80kg high strength steel plates ）
Q460C/D/E/F
GB/T16270-2009
GB/T 1591-2008
Q550C/D/E/F GB/T16270-2009
GB/T 1591-2008
Q690C/D/E/F GB/T16270-2009
GB/T 1591-2008
S460Q/QL/QL1
S500 Q/QL/QL1 EN10025-6：2004
S550Q/QL/QL1
S620 Q/QL/QL1 EN10025-6：2004
S690Q/QL/QL1 EN10025-6：2004
A514 Grade S ASTM A 514
60-90kg级低机光焊裂口敏理性思维性堆物攻度不锈钢板（60-90kg low welding crack sensitive steel plates Q460CFC/D/E YB/T4137-2005）
Q500CFC/D/E YB/T4137-2005
Q550CFC/D/E YB/T4137-2005
Q620CFC/D/E YB/T4137-2005
Q690CFC/D/E YB/T4137-2005
Q800CFC/D/E YB/T4137-2005
蘸火回火超标抗压强度不锈钢板
quench and temper ultra-high strength steel plates Q800C/D/E GB/T16270-2009
Q890C/D/E GB/T16270-2009
Q960C/D/E GB/T16270-2009
S890Q/QL/QL1 EN10025-6：2004
S960Q/QL/QL1 EN10025-6：2004
产品规格
锅炉和压力容器用钢板
Steel Plates for Boilers and Pressure Vessels主要用途
They are mainly used to manufacture boilers and pressure vessels. The steel plates for pressure vessels can be fabricated into device that will sustain certain pressure, temperature and medium, so they are required to possess high strength, good toughness, weldability and surface quality. Many kinds and sizes of the products are required to deliver in heat treatment condition and satisfy ultrasonic test requirements. These steels are widely used in various sectors in national economy, such as reactor, heat exchanger, separator, spherical tank, oil tank, LPG tank ,boiler steam drum and pressure pipes in machinery, petroleum and chemicals, electric power and metallurgy industries, etc.
牌号和标准
|
各称 |
钢材型号 Grade |
标准的号 |
|
热水锅炉和压力差容器等用厚钢板 |
Q245R、Q 345R、Q370R、Q420R |
GB/T 713 |
|
18MnMoNbR、13MnNiMoR、15CrMoR、12Cr2Mo1R、14Cr1MoR、12Cr1MoVR |
||
|
温度低水压溶器用钢材 |
16MnDR、15MnNiDR、15MnNiNbDR、09MnNiDR |
GB/T 3531 |
|
08Ni3DR、06Ni9DR |
||
|
高強度罐体及水电气经济压力镀锌管用钢板规格 |
A537/SA537 CL2/CL3 |
美标 |
|
07MnMoVR、07MnNiVDR、07MnNiMoDR、12MnNiVR |
GB/T 19189 |
|
|
抗HIC/SSCC贮槽厚钢板 |
Q245R(R-HIC)、Q345R(R-HIC)、(S)A516Gr60/65/70(R-HIC) |
大家让 |
|
炼铁高炉炉壳板 |
LK490C |
|
|
另外日本标准规定 |
A515/SA515、A516/SA516、A537/SA537各类A517/SA517一系列等 |
美标 |
|
P355GH、16Mo3、13CrMo4-5 |
德国标准 |
|
|
SPV355、SPV490 等 |
日标 |
产品规格
结构用热轧钢板和钢带
Hot-rolled Steel Sheets and Strips for Structures主要用途
结构用钢一般具有较高的强度与较好的成型性能，通常经过简单的加工后承受外部的载荷。适用于焊接、铆接、铰接等一般结构件用。该系列产品具有性能可靠，成型性能好，焊接性能优的特点，产品能够应用于建筑结构、桥梁、船舶、铁路车辆、管道大型机械及其他结构件等各个行业。主要按照国标进行供货，也可参照日标和欧标进行供货。
The structural steel generally has high strength and good formability, is
used to bear external load after simple fabrication and applicable to ordinary
structural members subject to welding, riveting and hinging.
This series of products are characterized by reliable performance, good
formability and excellent weldability, and can be used in various sectors like
building structures, bridges, ships, railway vehicles,
pipelines, large machineries and other structural members. The supply of those
products are mainly in accordance with Chinese national standards, and the
Japanese and European standards
may be taken as references as well.
牌号和标准
国标与日标牌号对应表
Cross Reference of the Steel Designations as per Chinese and Japanese Standards
|
标准规定 |
GB 912/GB3274/GB710/GB711 |
JIS G3101 |
|
型号 |
Q195, Q215A |
SS330 |
|
Q235A, Q255A |
SS400 |
|
|
Q275A |
SS490 |
国标与德标、欧标牌号对应表
Cross Reference of Steel Designations as per Chinese, German and European Standards
|
规格 Standard |
GB 912/GB 3274 |
EN10025-2 |
DIN 17100 |
|
牌号 Designation |
Q195、Q215B |
S185 |
St33 |
|
Q235B |
S235JR |
St37-2，RSt37-2 |
|
|
Q235C |
S235J0 |
St37-3 |
|
|
Q235D |
S235J2 |
- |
|
|
Q275B |
S275JR |
St44-2 |
|
|
Q275C |
S275J0 |
St44-3 |
|
|
Q275D |
S275J2 |
- |
|
|
Q345A |
E295 |
St50-2 |
|
|
Q345B |
S355JR |
- |
|
|
Q345C |
S355J0 |
St52-3 |
|
|
Q345D |
S355J2 |
- |
|
|
Q345E |
S355K2 |
- |
产品规格
主要产品The main products邮箱：250101电话：0531-67606362
核电用钢板 SA738Gr.B
Steel plate for nuclear power SA738Gr.B主要用途
With high strength, good plasticity, toughness and weldability, suitable for m🌜anufacture of the steel c✱ontainment vessel for the nuclear reactor plant.
牌号和标准
Product grade: SA738GR.B
执行力的标准： ASME SA-738/SA-738M-2010
Applicable standard: ASME SA-738/SA-738M-🍰2010
产品规格
核电用钢板 P235/265/295/355GH
Steel plate for nuclear power P235/265/295/355GH主要用途
牌号和标准
Product grade: P235GH, P265GH, P295GH, P355GH
下达基准： EN10028-2Applicable standard: EN10028-2
产品规格
核电用钢板 SA516GR55、 SA516GR60、 SA516GR65、 SA516GR70
Steel plate for nuclear power SA516GR55, SA516GR60主要用途
牌号和标准
Product grade: SA516GR55, SA516GR60, SA516GR65, SA516GR70ꦏ
进行规则： ASME SA-516/SA-516M-2010
Applicable standard: ASME SA-516/SA-516M-2010
产品规格
核电用钢板 SA517
Steel plate for nuclear power SA517主要用途
牌号和标准
Product grade: SA517GR.B, SA517GR.F
进行要求： ASME SA-517/SA-517M-2010
Applicable standard: ASME SA-517/SA𒅌-517M-2010
产品规格
60-90kg 级低焊接裂纹敏感性高强度钢板
60-90kg grade low welding crack susceptibility hig主要用途
牌号和标准
|
Q460CFC/D/E Q500CFC/D/E Q550CFC/D/E Q620CFC/D/E |
标准规定： YB/T4137-200💜5《 《低对接焊刮痕脆弱♋性高防度不锈钢钢板》 ෴ Standard: YB/T4137-2005: Low Welding Crack Susceptibility High🐻 Strength Steel Plate |
|
Q690CFC/D/E |
|
|
Q800CFC/D/E |
|
|
JG670CF G785CF |
商议：
JGX698-2011《 JG670CF、 JG785CF 低焊接加工纹裂特别敏各样堆物攻度钢条的技术协议书》
Agreement: JGXꦓ698-2011: JG670CF and JG785CF⛎ Technical Agreement for
Low Welding Crack Susceptibility Hig♎h St🌜rength Steel Plate
|
产品规格
90-120kg 级系列淬火回火高强度钢板
90-120kg grade series quenched and tempered high s主要用途
牌号和标准
|
Q800C/D/E |
标准的：
GB/T16270-2009《锻造度框架用调质钢条》
♒ Standard: GB/T16270-2009: Quenched and Tempered Steel Plate for High Strength Structure
|
|
Q890C/D/E |
|
|
Q960C/D/E |
|
|
JG1200D |
标准：
Q/3700LYS 299－2010《工程机械用超高强韧结构钢板》
Standard: Q/3700LYS 299－2010: Ultra High Strength and Toughness Structural Steel Plate for Engineering
Machinery
|
产品规格
A、 B、 D、 E 级船体用结构钢板
A, B, D and E grade structural steel plate for shi主要用途
牌号和标准
Grade: A, B, D, E (Z25, Z35);
执行标准：九国船规、渔规、 GB712-2000《船体用结构钢》
Applicable standard: Rules for certification by the world's most famous nine recognized classification soc🍰ieties, regulations for fisheries, and 💮GB712-2000 Structural Steel for Ship Hull
产品规格
主要产品The main products邮箱：3电话：0531-67606362
国标H型钢
Chinese H-steel主要用途
牌号和标准
产品规格
美标H型钢
American standard H-section steel主要用途
牌号和标准
产品规格
欧标H型钢
EN H-section steel主要用途
牌号和标准
产品规格
日标H型钢
Japanese standard H-section steel主要用途
牌号和标准
产品规格
澳标H型钢
Australian Standard H-section steel主要用途
牌号和标准
产品规格
俄标H型钢
Russian Standard H–section steel主要用途
牌号和标准
产品规格
耐低温用H型钢
Low temperature resistant H–section steel主要用途
牌号和标准
产品规格
高强度H型钢桩
High strength H–section steel pile主要用途
牌号和标准
产品规格
耐火耐候H型钢
Fire resistant and weather resistant H-section ste主要用途
牌号和标准
产品规格
抗震性能H型钢
Seismic resistant H-section steel主要用途
牌号和标准
产品规格
核电用H型钢
H-section steel for nuclear power plant主要用途
牌号和标准
产品规格
船体及石油工程用钢
Steel for ship hulls and petroleum projects主要用途
主要应用于船舶内部构造用结构件。石油平台用 H 型钢应用于石油平台整体结构建🦩造领域。 Mainly used for structural parts of internal structures of ships. Petroleum platform H-section steel is used in the construction of integr💛al structure of petroleum platform.
牌号和标准
产品规格
国标、英标、美标和欧标等规格产品。 Chinese Standard🅠, British standard, European Standard, Americ🀅an Standard and other specifications for products.
铁路接触网支柱用H型钢
H-section steel for pillars/supports of railway ca主要用途
主要应用于铁路领域的接触网支柱，是钢筋混凝土接触网支柱的替代产品。 Mainly used in manufacture of the pillars/supports for railway catenary system, as an alternative product of thꦆe reinforced concrete pillars/supports for the catenary system.
牌号和标准
产品规格
电网建设用大角钢
Large-sized angle steel for power grid constructio主要用途
牌号和标准
产品规格
∠220、∠250 类别 ∠220, ∠250 Series
矿山工程用钢
Steel for mining projects主要用途
主要用于矿山隧道支护，特别是一些围岩变形量较大的巷道，也对矿用支护型钢的性能提出了特殊的要求。 Mainly used in mine tunnel supports, especially for some roadways with relatively large deformation of surrounding rock, and also used in structures with special requirements for the performance of the mine supporting stee🐷l.
牌号和标准
产品规格
铁路车辆大梁用钢
Steel used for frame of railway vehicle主要用途
主要用于 70 吨及以上的铁道车辆平车的大梁。 Mainly used in manufacture of the frame for the railway vehicle platform wagon of 70 tons and🎉 above.
牌号和标准
产品规格
630×200 系列 630×200 Series
汽车大梁用钢
Steel for automobile frame主要用途
牌号和标准
产品规格
叉车门架用钢
Steel for forklift portal-frame主要用途
该产品主要应用于叉车制造业，主要用于制作 1.5～10t 规格叉车的门架制作。 This product is mainly used in forklift manufacturing industry mainly𓂃 for manufacture of portal frame for forklift truck of 1.5~10🍬t.
牌号和标准
产品规格
履带板
Track plate主要用途
履带板主要用作链轨ꦰ式挖掘机、推土机的行走部件。 Track plate is mainly used for manufacture of the travelling parts of🌌 track-mounted excavator and bulldozer
牌号和标准
产品规格
中低速磁悬浮列车轨排
Middle and low speed Maglev train track skeleton主要用途
应用于中低速磁悬浮列车轨道。 Used in medium and low speed m൩aglev train track.
牌号和标准
产品规格
海洋工程用钢
Steel for ocean projects主要用途
主要应用于海洋石油平台整体结构建造 、平台配套海上浮式储油船（FPSO ）模块制作、船舱顶梁及框架等结构制造。 Mainly used in construction of offshore oil platform structure, fabrication of platform supported Float Production Storage and Offloading (FPSO ) module, manufacture of roof beam and frame structure of cabin.
牌号和标准
产品规格
H200B～HE1000B， UPN 系列槽钢、UPE 系列、 IPE 系列、角钢系列 H200B~HE1000B and UPN series channel st𝔍eel, UPE series, IPE ꩵseries and angle steel series
主要产品The main products邮箱：2电话：0531-67606362
高端齿轮钢
High-end gear steel主要用途
牌号和标准
Product grade: SCM822H, SAE8620H, 18NiCrMo5,
Applicable standards: Q/370000SGT 103-2013, Q/37000🌺0SGT 100-2013, EN10084-2008
产品规格
高端轴承钢
High-end bearing steel主要用途
牌号和标准
Product grade: GCr15SiMn
执行标准： GB/T18254-2002
Applicable standard: GB/T18254-2002
产品规格
铁路用钢
Railway Steel主要用途
牌号和标准
Product grade: 25MnCrNiMoA
连接标准规范：科技意向书
产品规格
风电用钢
Steel for wind power主要用途
牌号和标准
Product grade: S355NL
执行标准：技术协议
Applicable standard: Technical agreement
产品规格
石油管线用连铸圆坯
Continuous casting round billet for petroleum pipe主要用途
牌号和标准
Product grade: X52NS
程序执行要求：能力合同
Applicable standard: Technical agreement
产品规格
系泊链及船用锚链用钢
Steel for mooring chain and marine anchor chain主要用途
牌号和标准
Product grade: CM490, CM690
下达标准单位： GB/T 18669
Applicable standard: GB/T 18669
产品规格
模具用钢
Die steel主要用途
淬透性高，热处理变形率较💃低，其性能及使用寿命高。使用于模锻锤锻模、铝合金压铸模、热挤压模具、高速精锻模具及锻造压 力机模具。 Provided with high hardenability, low deformation rate of heat treatment, high perfor🍰mance and long service life, Suitable for use in manufacture of die forging hammer forging die, aluminum alloy die-casting die, hot extrusion die, high speed precision forging die and forging press die.
牌号和标准
Product grade: H13
连接要求:GB/T1299—2000
Applicable standards: GB/T1299-2000
产品规格
高压锅炉用无缝钢管用钢
Steel for seamless steel tubes for high pressure b主要用途
牌号和标准
Product grade: P91
执行标准：GB/T5310-2008 或技术协议
Applicable standard: GB/T5310-2008 or🅠 technical agreement
产品规格
主要产品The main products邮箱：4电话：0531-67606362
汽车大梁用热轧钢带
Hot rolled steel strip for automobile frame主要用途
AUTOMOBILE FRAME SERIES STEEL PRODUCTS ARE MAINLY USED IN MANUFACTURE OF THE MAIN BEAM, CROSSBEAM, SIDE-BEAM AND CAR BODY AND OTHER STRUCTURAL PARTS OF THE COMMERCIAL VEHICLE, WHICH ARE REQUIRED TO BE PROVIDED WITH SUFFICIENT TENSIL🅰E STRENGTH, YIELD STRENGTH, GOOD FORMABILITY, HIGH ELONGATION AND EXCELLENT COLD BENDING PROPERTIES THAT CAN MEET THE REQUIREMENTS OF SHEARING, BENDING, STAMPING, ROLL PRESSING, PUNCHING, WEღLDING AND OTHER PROCESSINGS, WITH STABLE PHYSICAL PROPERTIES.
牌号和标准
牌号： 510L、 610L、 700L、 J700、 J800 QStE3ꦅ80TM、 QStE420TM、 QStE460TM、 QStE500TM、 QStE700TMS420MC、 S460MC、S500MC、 S550MC、 S600MC、 S650MC、 S700MC
Grade: 510L, 610L, 700L, J700, J800 QStE380TM, QStE420TM, QStE460TM, QStE500TM,🔯 QStE700TMS420MC, S460MC, S500MC, S550MC, S600MC, S650MC, S700MC
继续执行规范标准： GB3273-2005《各类汽车车梁用冷轧钢板规格和尼龙带》SEW092-1990《冷机头的冷轧细金属材质晶粒钢》DIN EN 10149-2： 1996《冷成 型用的高塑性变形点钢冷轧扁钢厂品》
Applicable standard: GB3273-2005: Hot-Rolled Steel Plate and Steel Strip for Automobile Frame SEW092-1990: Cold Formed🧔 Hot-Rolled Fine Grain Steel DIN EN 10149-2: 1996 Hot Rolled Flat Steel Products with High Yield Point for Cold Forming
产品规格
汽车车轮用热轧钢带
HOT ROLLED STEEL STRIP FOR AUTOMOBILE WHEEL主要用途
Automobile wheel series steel products is mainly used for manufacture of spokes and rim for rolling-type wheel of a automobile, which are required to be provided with good flange elongation, cold forming, flash welding, fatigue properties and other mechanical properties, and should also have good surface quality and the dimensional tolerance to ensure the air tightness of the wheel and no large🅷 rotating vibration pendulum occurring in its operation.
牌号和标准
牌号： 330CL、 380CL、 420CL、 490CL、 SAPH310SAPH370、 SAPH400、 SAPH440、 SH540FB、 SH580FB、 HR440/580HE Grade: 330CL, 380CL, 420CL, 490CL, SAPH310SAPH370, SAPH400, SAPH440, SH540FB, SH580FB, HR440/580HE
履行要求：YB✤/T4151-2006《轿车车轮子用热轧厚钢板厚钢板材和链条》JISG3113《轿车架构用热轧厚钢板厚钢板材和链条》及有限公司内控要求 SGYJ-001-2015 《客车车轱辘用高韧性度热轧钢高扩孔钢刚板和尼龙带》GBT 20887.2-2010 《客车用高韧性度热连轧刚板及尼龙带 第 2 要素： 高扩孔钢》
Applicable standard: YB/T4151-2006: Hot-Rolled Steel Plate and Steel Strip for Automobile Wheel JISG3113: Hot Rolled Steel Plate and Steel Strip for Automotive Structures and SISG’s internal quality standards SGYJ-001-2015: High Strength Hot Rolled High Reaming Steel Plate and Steel Strip for Automobile Wheel GBT 20887.2-2010: High Strength Hot Rolled Steel Plate and Steel Strip for Automobile-Section 2 : High Reaming Steel
产品规格
汽车用高强度热轧双相钢带
High strength hot rolled dual-phase steel strip fo主要用途
The hot rolled dual-phase steel is generally used for automotive parts with high strength, high impact resistance and absorbing energy and should meet a certain forming requirement, such as wheels, bumpers, suspension systems and their reinforcing parts. The hot rolled dual phase steel is provided with high strength, low yield ratio, high initial processing hardening rate, excellent matching betꦿween strength and toughness and other advantages, in line with the development theme of lightweight, high performance, safety and environmental protection, energy saving for automotive materials, which has thus been widely used in the automotive industry.
牌号和标准
Grade: DP540, DP600
履行标准规范： JGX677-2010 《高韧度带钢双相角钢和链条供应科技水平》GB/T20887.3-2010 小轿车用高韧度热连轧角钢及链条-3 组成部分，双相钢
Applicable standard: JGX677-2010𝕴: Technical Requirements for Supply of High Strength Hot Rolled Dual-Phase ℱSteel Plate and Strip
GB/T20887.3-2010: High Strength Hot Rolled Steel Plate and Steel Strip for Automobile - Section III-Dual Steel
产品规格
汽车传动轴用热轧钢带
Hot rolled steel strip for automobile transmission主要用途
Automobile transmission shaft tube steel is mainly used to make automobile drive shaft tube. As the main function of the transmission shaft tube is to support revolving body and transmit power, the material should be provided with: sufficient strength, stiffness and a certain degree of toughness as well as higher fatigue strength, that is, the raw materials should be provided with good comprehensive mechanical properties. The longitudinal welding technology is generally used to manufacture the automobile transmission shaft tube, and the dimension control process is based on the method of controlling the inner diameter by controlling the outer diameter; Therefore, the steel for the shaft tube of the🍎 transmission shaft should be provided with good welding performance and high dimensional precision.
牌号和标准
Grade: 440QZ, 480QZ, 700QZ
运行规则： JGX658-2010 《 440QZ、 480QZ 带钢带钢系统商议》
Applicable sta𝓰ndard: JGX658-2010: 440QZ, 480QZ Technical Agreement for Hot Rolled Steel Strip
产品规格
石油天然气输送管用热连轧钢带
Hot continuous rolling steel strip for petroleum a主要用途
页岩油工业大自然植物气推送管顶事热连轧带钢兼备较高的的强度、高的塑韧度，低的韧冷脆的变化热度，高品质的焊结功效已经高品质的抗氢致空鼓和 塑炼物内应力防腐蚀空鼓功效，重要应用在手工制造推送管页岩油工业、大自然植物气、水煤浆等媒介的管道网。 The hot continuous rolling stee🍨l strip for petroleum and gas transportation pipeline is provided with high strength, high plasticity, low ductile brittle transition temperature,good weldability, good welding performance as well as excellent anti-HIC and sulfide stress corrosion cracking properties, which is mainly used in manufacture of pipelines for tr💖ansporting petroleum, natural gas, coal-water slurry and other media.
牌号和标准
GB/T14164-2013: Hot Rolled Wide Steel Strip for Transportation Pipeline of Oil and Gas Pipelines;
API Spec 5L: Steel Pipe for Pipeline ; GBꦡ/T9711.2-1999: Technical Speci🦩fication for Delivery of Transportation Steel Pipe for Petroleum and Natural Gas Industry
产品规格
油井套管用热连轧钢带
Hot continuous rolling steel strip for petroleum w主要用途
牌号和标准
产品规格
低铝、低碳、低硅复合材料用热轧钢带
Hot rolled steel strip for low aluminum, low carbo主要用途
一般用于钢铝包覆板基料。钢铝包覆用料结合起来了钢的高韧度、易拆洗和铝的质轻、价廉、 美丽的导电、传热性性等显著优点，在航班、机械化、所有、医辽、二手车、电缆等双这方面这个领域获取了广泛使用使用。 The hot-rolled steel strip for low aluminum, low carbon and low silicon composite materials is mainly used as base material for steel-aluminum composite plate. Steel aluminum comℱposite has been widely used in many fields, such as aviation, machinery, chemical engineering, medical treatment, automobile, electric power and so on, thanks to its high strength, easy cleaning, light weight, low price, excellent electrical conductivity and ther💛mal conductivity.
牌号和标准
Grade: YBFe, SRG, DK50, DC01-LY Applicable standard: ౠTechnical agreement
产品规格
集装箱用热轧钢带
Hot rolled steel strip for containers主要用途
The steel for containers is provided with high atmospheric corrosion resistance, suitable for use in manufacture of container shell plate, structural parts and so on. The container steel developed by SISG is based on the design with reasonable composition of Cu, P, Cr and Ni added in the low carbon steel, with excellent c﷽orrosion resistance and precise dimension as well as good plate shape, surface quality and formability index, which can well meet the requirements for the container steel.
牌号和标准
Grade: SPA - H
下达标准的： JIS G3125 《高耐大方结垢冷轧钢板规格》
Applicable standard: JIS G3125: High Atmosphe💃ric 🐷Corrosion Resistant Rolled Steel Plate
产品规格
主要产品The main products邮箱：5电话：0531-67606362
三亿体育 出口的钢筋产品
SISG’s steel products for export主要用途
牌号和标准
|
No. |
Supply grade |
Standard |
Specification mm |
Delivery status |
Application field |
|
1 |
British standard 460 (B) |
BS4449 |
Φ10-Φ50 |
Hot rolled |
Export, Foreign engineering construction |
|
2 |
British standard B500B |
BS4449 |
Φ10-Φ50 |
Hot rolled |
|
|
3 |
Japanese standard SD295A |
JISG3112 |
D10-D51 |
Hot rolled |
|
|
4 |
Australian standard 500N |
AS/NZS4671 |
Φ12-Φ36 |
Hot rolling/Controlled rolling |
|
|
5 |
Korean standard SD400 |
KS D 3504 |
D10-D5 |
Hot rolled |
|
|
6 |
Japanese standard SD390 |
JISG3112 |
D10-D51 |
Hot rolled |
|
|
7 |
Japanese standard SD390 |
ASTM A615-A615M |
3#-18# |
Hot rolled |
|
|
8 |
Malaysia |
MS146 |
According to user's requirement |
According to user's requirement |
产品规格
普通建筑用热轧钢筋
HOT ROLLED REINFORCING BARS FOR ORDINARY BUILDING主要用途
牌号和标准
|
序号顺序 |
名称 |
♒ 牌号 ♉ |
尺寸 mm |
下达条件 |
种类 |
|
1 |
热轧钢带肋钢材盘条 |
HRB400/HRB400E/HRB500/HRB500E |
Φ6-Φ10 |
GB1499.2 |
建筑设计用钢 |
|
2 |
带钢光螺纹钢筋盘条 |
HPB235/HPB300 |
Φ6-Φ22 |
GB1499.1 |
产品用钢 |
|
3 |
钢筋混凝土用热轧带肋钢筋 |
♏ HEB335/HRB400/HRB500/HHB335E/HRB400E/HRB500E/HRB600 ༒ |
Φ10-Φ50 |
GB1499.2 |
房子用钢 |
No.
Name
Grade
Specification
mm
Applicable
standard
Purpose
1
Hot rolled ribbed steel bar wire roll
HRB400/HRB400E/HRB500/HRB500E
Φ6-Φ10
GB1499.2
Steel for building
2
Hot rolled plain round steel bar roll
HPB235/HPB300
Φ6-Φ22
GB1499.1
Steel for building
3
Hot rolled ribbed steel bar🅠 for
reinforced concrete
HEB335/HRB400/ဣHRB500/ HHBꦆ335E/HRB400E/HRB500E/
HRB600
Φ10-Φ50
GB1499.2
Steel for building
产品规格
特殊用途棒材
Bar materials for special purpose主要用途
牌号和标准
|
No. |
Steel grade |
Steel grade |
Specification mm |
Applicable standard |
Purpose |
|
1 |
Anti-seismic Reinforceing steel bar |
HRB335E/HRB400E/HRB500 |
Φ10-Φ50 |
GB1499.2 |
Applied to seismic prone areas and building with high🧸 requir🌃ements or super high-rise buildings with special use requirements, large-span bridges, airports, nuclear power plants, tunnels, water conservancy projects and other fields. |
|
2 |
Finish rolling thread steel |
PSB785/PSB 830/HRB500JZ |
Φ25, Φ32 |
GB/T20065 |
Used in continuous beam and large frame structure in super large building, large water conservancy project, industrial and civil buildings, and highway a🐠nd railway large and medium span bridges, nuclear power plant, grou🧜nd anchors and other projects. |
|
3 |
Hot rolled Round steel |
20MnSi |
Φ14-Φ60 |
Φ14-Φ60 |
Used in manufacture of chains |
|
4 |
Anchor rod Reinforceing steel bar |
MG335 |
Φ18-Φ22 |
LGJX16-2011 |
Mainly used in coal mine roadway su♐pport, and also suitable for u🅺se in highway tunnel support and side rock protection. |
|
MG400 |
|||||
|
MG500 |
LGJX12-2011 |
||||
|
Full-strength anchor rod |
LGJX14-2011 |
||||
|
Right-screw anchor rod |
Φ16-Φ22 |
LGJX02-2010 |
|||
|
CRM600 |
Φ22 |
||||
|
CRM600 |
Φ220, Φ22 |
LGJX49-2010 |
|||
|
5 |
Resin anchor Rod steel bar |
MG335-MG600 |
Full sizes |
Full series |
产品规格
鲁公网安备 37010102000509号